百米2路由器有不错的大功放，做AP很合适，目前价格也不高，还算比较划算的。原厂固件是OPENWRT改版的，需要破解一下，不然会弹广告或者不能设置无线密码。

root@100msh:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00040000 00010000 “u-boot”
mtd1: 00010000 00010000 “u-boot-env”
mtd2: 00640000 00010000 “rootfs”
mtd3: 00330000 00010000 “rootfs_data”
mtd4: 00140000 00010000 “kernel”
mtd5: 00010000 00010000 “cfg”
mtd6: 00010000 00010000 “oem”
mtd7: 00010000 00010000 “art”
mtd8: 00780000 00010000 “firmware”

百米2刷波讯固件的各种坑和解决方法，如终端乱码，键盘不能用不能发送数据,不能进UBOOT等，没有无线信号出来等：

src/gz barrier_breaker_base http://archive.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/base
src/gz barrier_breaker_luci http://archive.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/luci
src/gz barrier_breaker_packages http://archive.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/packages
src/gz barrier_breaker_oldpackages http://archive.openwrt.org/barrier_breaker/14.07/ar71xx/generic/packages/oldpackages
src/gz barrier_breaker_routing http://archive.openwrt.org/barrier_breaker/14.07/x86/generic/packages/routing
src/gz barrier_breaker_telephony http://archive.openwrt.org/barrier_breaker/14.07/x86/generic/packages/telephony
src/gz barrier_breaker_management http://archive.openwrt.org/barrier_breaker/14.07/x86/generic/packages/management

百米生活路由器2的原厂固件登陆账号默认用户名是:root
请恢复出厂设置后再试，3个通用原厂密码：

下面是基于原厂openwrt固件破解，添加了SSH，去掉认证，后门，搞好后可以随意安装ipkg软件，能设置无线WIFI密码,100%的基于官方原厂固件，什么烧功放，ART损坏，不存在的事情。
一根网线实现蹭网，删除接口里的WAN，LAN接口物理设置里勾选 以太网适配器eth1 lan,wan